And connect your HDMI cable from your Raspberry Pi to your monitor or TV.įor a wired network connection, plug the ethernet cable into the Ethernet port. ![]() Next, plug your keyboard and mouse into the USB ports on the Raspberry Pi. If your board is already mounted into a case, the case should not hinder the placement or retrieving of the SD card. Simply place the micro card into the SD card slot on the Raspberry Pi as shown in the figure below. Make sure you have noobs or any compatible OS preloaded onto your SD-card. Now the heatsinks are placed, it’s the right moment to mount your board into your preferred case.įor optimal performance, we recommend a class 10 card with a minimum of 8GB of storage capacity. If you’re not sure how to do it, have a quick look at our tutorial “Placing the heatsinks on the Raspberry Pi 3 B+”. Start to place the heatsinks onto the board. ![]() After having completed this tutorial, your Raspberry Pi is equipped with all the basic components and you are ready to install the operating system.īe sure to have prepared following components: – your Raspberry Pi □ – a heatsink set (optional) – Raspberry Pi case – USB keyboard – USB mouse – micro-SD card (already preloaded with NOOBS or an OS) – HDMI cable connected to a monitor or TV (supporting HDMI video) – ethernet cable to connect to your LAN (optional) – 5V power supply with micro-USB plug (make sure it’s powerful enough ex.: 2500mA) If you miss one of the components, do not hesitate to visit our shop. ![]() This tutorial will guide you to setup the hardware components on your Raspberry Pi.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
June 2023
Categories |